The optional features that can be added to the products are listed below. For detailed information, please contact your sales representative.

• Gravity stool, fixed or height-adjustable table, and power outlet group can be added to Calma Small afterwards.
•  Reservation panel can be selected as optional features during pre-order stage of Calma For U.
• Soft seating, mediawall can be added to Calma For U afterwards.
• Soft seating, meeting table, and screen holder can be added to Calma Medium and Calma Large afterwards.
• Meeting table and screen holder can be added to Calma XLarge and XXLarge afterwards.

The Calma For U Mediawall module is suitable for All in One PCs and monitors up to 27 inches. For Calma Medium, Large, XLarge, and XXLarge, it is recommended to use a maximum 32-inch monitor, considering the viewing distance.

In requested configurations, one unit of Calma, customized specifically for you and tested in the factory, is delivered. All necessary parts are included inside the crate and installation box. In addition to items such as a ladder, drill, etc., extra materials needed during assembly can be found in Calma installation manual prepared according to dimensions.

Each Calma is delivered to the user along with crates and an additional box. Inside the crate, you’ll find main components such as walls, floors, desks and installation boxes while the other cardboard box contains seating (if available).

The dimensions of the crates vary depending on the Calma model. Calma XLarge and XXLarge products are shipped in two separate crates.

Thanks to the ease of assembly provided by Calma, assembly times have reached an optimum level. Some parts are pre-assembled during testing in the factory, which helps shorten the assembly time for the customer. Assembly times are as follows. You can allocate around 10-15% extra time based on the experience of the assembly team. For experienced assembly personnel:

Calma Small 100×110: 25 minutes

Calma For U 100×140: 30 minutes

The electrical connection for Calma is typically made from the right and back wall as standard. Main power cable lengths are provided as 3.5 meters.

Socket types used can be chosen during the ordering process from European Standard, American Standard, Multi-standard, UK Standard, US NEMA Standard and Swiss Standard.

Data connection in Calma is provided with RJ45 sockets. In standard products, it is extracted from the floor, but with prior notice during the order or with a minor adjustment during assembly, it can also be extracted from the ceiling.

For custom standards and regulations, please advise with your sales representatives and request suitable components.

Calma units are designed with a height of 224 cm. To ensure proper airflow and comfortable installation, it is recommended that the ceiling height of the installation area be 235 cm or higher. Additionally, it is advised not to block the air outlets located on the side walls, and the pods should be positioned with at least a 20 cm gap between the pods or to the wall.

Calma Small, For U and Medium modules are equipped with four castors to facilitate easy positioning of Calma in its intended location after assembly. However, it is not recommended to frequently move the pods once they are in place. After any relocation of Calma, adjustments to doors, feet and floor may be necessary due to changes in floor alignment.

For Calma Large, XLarge and XXLarge modules, due to their weight and size, they are not equipped with castors. Therefore, it is essential to install these pods in their designated location upon assembly.

Yes, the fans and lights are dimmable, allowing users to adjust them according to their preferences. Through motion sensors, the fans and lights activate automatically when someone enters the pod, indicated by the occupancy sensor turning from green to red to signify that the pod is in use. If no motion is detected, they can optionally deactivate after a period ranging from 30 seconds to 8 minutes.

It’s recommended not to keep this time too short, as it helps with air purification after each use. During this time, the occupancy sensor continues to illuminate with a red light, indicating that the pod is occupied, and when it turns green, Calma is ready for a new user.

Calma has been designed with powerful fans based on technical evaluations, and the number of fans varies depending on the size of the Calma unit. Inside Calma, highly efficient Noctua 2000 rpm double redundancy fans are utilized. The Calma air exchange period is every 42 seconds, with an air Exchange rate up to 106 times per hour.

The fans are installed in the factory to blow fresh air from the outside to the inside. This ensures that fresh air continues to enter while you continue your work. Additionally, it is important for the air inlet and outlet areas not to be obstructed and for Calma not to be positioned directly in sunlight for maintaining the quality of the fresh air. Airflow direction can be reversed in Calma pods, from ceiling to vents at the bottom and vice-versa.

Thanks to the powerful sensors in Calma, the lights and fans start working as soon as you enter. You can use the controls in the touch panel to adjust the light intensity and fan settings to your desired level.

• Calma Small: 32 W
• Calma For U: 32 W (45 W if equipped with Mediawall)
• Calma Medium: 54 W
• Calma Large: 94 W
• Calma XLarge & Calma For All: 100 W
• Calma XXLarge: 148 W

• Do not plug in any appliances more than 220-230 VAC.
• Ensure Calma is unplugged before opening the access cover on top.
• Avoid blocking the vent grill, and maintain a 20 cm distance between Calma and walls.
• Keep the door closed at all times.
• Do not smoke inside
• Keep all fire sources away from Calma.
• Avoid installing high-power-consuming devices such as heaters or vacuum cleaners inside Calma; the maximum power outlet capacity is 750W.